I-Beam Cable Trolley XL-Line Series 0375

I-Beam Festoon Systems

Cable trolley with multi layer side-loading cable saddles for round cables. Suitable for maximum mechanical and dynamic loads including traversing operation and strong lateral forces. Suitable for short work cycles and high speeds – combinable with powered cable trolleys.

Main applications

STS-container cranes
Scrap and ladle cranes in steel mills
High-speed conveyor systems
Transport systems

Specification

Travel speed max.^{1) 2)}: 300 m/min [984.25 ft/min]
Load capacity/trolley max.¹⁾: 800 kg [1763.7 lb]
Main rollers diameter: 125/160 mm [4.92" and 6.3"]
Ambient temperature: -30 ... +50 °C [-22° F to 122° F]
Applications: indoor / outdoor / sea climate
I-beam: parallel flange

¹⁾ depending on roller size/ roller material
²⁾ together with motorized trolleys

Downloads

Festoon Systems for I-Beams Program 0366 | 0375 | 0380

PDF | 6.05 MB

Language: English

Document type: Brochures

Download

MAL0300-0004-EN Festoon Systems for I-Beams - 0366, 0375

PDF | 5.94 MB

Language: English

Document type: Operation Manuals

Download

WV0300-0052-EN Checklist for Motorized Festoons - Supplement_0365-0380

PDF | 1.4 MB

Language: English

Document type: Service Manuals

Download

FAQ

When is the Cable Trolley XL-Line Series 0375 used?

The I-Beam Festoon System XL-Line 0375 is typically used in high-dynamic applications such as Ship-To-Shore container cranes. Due to the high-dynamic load the use of motorized trolleys is recommended in most cases.

How does an I-Beam System work?

Cable trolleys are installed on a I-beam. Cable package is installed on the cable trolleys in cable loops. The system is operated by a towing trolley or towing clamp which is fixed to the energy consuming equipment.

How is the energy and data transmitted?

Energy and data are transmitted via flexible flat or round cable packages. Any cable used must be suitable for use in a festoon system. Various types of cable with PUR or rubber insulation are available.

What is the typical track profile?

The system is typically operating on tapered or parallel I-beams. The possible I-beam types have been standardised IPE 240; 250 x125 x 6 x 9; W 8 x 18 ; INP 220; GB 706-65/20a; 200 x 100 x 7 x 10x8°; S8 x 18.4

Are I-Beam Festoon Systems for indoor or outdoor use?

I-Beam Festoon Systems can be used both indoors and outdoors.

What are the typical wear parts?

Typical wear parts are the rollers of the running gears and the buffers on the trolleys. The rubber damping devices used in a system are also subject to wear.